Now that you’ve mastered the basics of your RØDECaster Pro, it’s time to learn more about setting up your microphone channels.  

 

The RØDECaster Pro has four XLR channels for plugging in four microphones. You can use any microphone with the RØDECaster Pro, as long as it can be connected to an XLR input (note: USB microphones like the NT-USB Mini cannot be used with the RØDECaster Pro).  

 

These four XLR inputs are found at the back of the unit and correspond to the first four channels on the mixer, which have their own dedicated colour. When it comes to most settings, these channels are identical, and the instructions below can be applied to any of the channels individually. We’ll use Channel 1 as an example.  

Rear of RODECaster Pro with 1 XLR cable plugged into channel 1 XLR input

Connecting Your Microphone

To start, plug your microphone into the XLR input marked ‘1’ on the back of the RØDECaster Pro using a standard XLR cable. We also recommend plugging in headphones or speakers, so you can hear your audio. If you’re listening back on speakers, ensure the fader for Channel 1 is turned all the way down before plugging in to avoid any feedback.

RODE PodMic connected to DS-1 desk stand with headphones attached and an XLR cable leading out of frame.

Basic Microphone Settings

To access the microphone settings, push the numbered button above the channel you want to edit (alternatively, tap the ‘Settings’ cog on the home screen, tap ‘Channels’, then tap the channel you want to edit). From here you will be presented with four different sub-menus.

Microphone channel 1 settings menu on the RODECaster Pro

Microphone

These settings let you tailor the channel for the microphone that is plugged into it. There are presets for five popular RØDE podcasting mics: the PodMic, Procaster, Broadcaster, NT1, NT1-A, as well as the Electro-Voice RE20. If you aren’t using one of these microphones, there are universal presets for condenser and dynamic microphones. Select one that best matches the microphone you are using.

RODECaster Pro microphone selection screen with RODE PodMic selected

Level

This menu is where you set the gain for the selected channel. The control in this menu does a slightly different job to the fader on the front panel of your RØDECaster Pro. The fader allows you to control the volume of the channel in your podcast whereas the gain ensures that your voice will be loud enough but not distorted, and give you the best quality. 

To get a good level, start talking into your mic at a natural volume (not yelling or whispering). You'll see the meter on the screen lighting up. Adjust the level '+' and '-' buttons so that when you are talking, the meter is reaching into the area indicated by the green lines. If you need to turn on phantom power for your condenser microphone, you can switch this on or off on this menu too, although this should not be necessary if you selected the right mic preset. 

Now that your microphone is selected and your gain is set, you're ready to optimise the mic channel for your voice type.

level

Pro Tip

In general, most dynamic microphones require more gain to achieve a good level than condenser microphones. For example, if you are using a PodMic, you will need to set the gain higher than if you were using an NT1.

Voice

This setting lets you tailor the RØDECaster Pro to the type of voice you or your guest has. There are options for ‘Tone’ (‘Deep’, ‘Medium’, ‘High’) and ‘Strength’ (‘Soft’, ‘Medium’, ‘Strong’). Choose the two options that best describe your voice.


Audio Processing

Finally, there’s the processing and effects – this is where you can really craft your voice to make it sound perfect for podcasting. To access these, tap on ‘Audio Processing’ within the channel settings menu.

Here you have access to a compressor, de-esser, high-pass filter, noise gate, plus the APHEX Aural Exciter™ and Big Bottom™ – two legendary audio processors found in the world’s best recording and broadcast studios.

Basic Audio Processing settings screen on the RODECaster Pro

Compressor  This will help make your voice sound rich and more balanced and consistent.

De-esser  This will help reduce ‘sibilance’ in your voice – those harsh ‘sss’ ‘t’ ‘shhh’ sounds.

High-pass Filter  This will cut low frequencies in your audio signal, which is useful for preventing rumble from air conditioners, traffic noise and other vibrations being heard in your recording.

Noise Gate  This helps reduce any background noise in your audio signal, giving your recording a cleaner, more professional sound.

APHEX Aural Exciter – This will introduce some harmonics to the higher frequencies of your voice, giving it more shine and sparkle.

APHEX Big Bottom – This will introduce harmonics to the lower frequencies in your voice, adding richness and depth.

In the video below, we’ll give you a quick overview of what each of these processors does and how to use them. To learn about the advanced versions of these effects and processors, head over to the Using Advanced Processing and Effects page.


Final Tips on Setting up Microphone Channels

There’s an extra processor that can be extremely useful when podcasting called “Ducking”. When switched on, it will turn down all other channels on the RØDECaster Pro whenever the host on Channel 1 is speaking. This is handy for making sure that the host can be heard over all other sound sources in a busy podcast. To turn this on, go to ‘Settings’ > ‘Advanced’ > ‘Audio’ > ‘Processing’ and tap on ‘Ducking’.

Bonus Tip

Use the XLR-ID to keep your cables organised. These are a set of eight colour-coded ring attachments for your XLR cables so you can easily identify which microphone is plugged into which channel.

xlr-id cable tags for the rodecaster pro

Mute and Solo Buttons

Each microphone channel also has a mute and solo button. The mute button is handy in case a channel begins to feedback, or if you need to silence one of your guests. The solo button allows you to quickly listen to a single channel without having to mute all the other inputs.

Always make sure that, as the host, your headphones are connected to Headphone Output 1 or the 3.5mm headphone output on the front of the unit in order to hear the solo and mute buttons properly.

Solo and Mute buttons for each channel on the RODECaster Pro

Pro Tip

If you can’t hear your podcast playing back through the RØDECaster Pro, there’s a good chance one of your solo buttons is engaged.

Now that your microphone channels are set up, check out the section on correctly setting up headphones and speakers.