Question 1

Can I connect the Wireless GO II to devices with XLR inputs?

Accepted Answer

Yes, this is possible using the supplied SC5 cable or any other TRS to TRS cable and the VXLR Pro adaptor to convert the signal. You can even use the SC11 splitter cable and two adaptors to break out the Wireless GO II's two channels onto separate output jacks for dual channel recording.

Question 2

How do I connect the Wireless GO II's windshields?

Accepted Answer

The Wireless GO II's windshields feature a twist-and-lock bayonet connector, which ensures an extremely strong connection. To attach them securely, align the two white dots on the windshield with the black dots on the receiver, then push the windshield down and twist to lock it in place. Reverse the process to remove them.

Question 3

How does the Wireless GO II's fine gain control work?

Accepted Answer

The Wireless GO II's fine gain control can be enabled/disabled via RØDE Central. To activate it, open RØDE Central, plug in the receiver, navigate to the settings page, and toggle the 'Gain Mode' button to 'Fine'. This will expand the Wireless GO II's three-stage pad to a 10-stage pad, which goes from 0dB to -30dB in 3dB increments. It also gives you access to an extra 6dB of gain reduction, which is useful if you have a particularly sensitive camera or recording device. Read more about the gain control at the Wireless GO II User Guide.

Question 4

How is the Wireless GO II's Series IV digital transmission different to the original Wireless GO’s Series III?

Accepted Answer

RØDE’s Series IV digital transmission delivers an increased range of 200m and improved transmission stability, particularly in environments with lots of RF activity (such as dense urban areas, shopping malls, universities and convention centres).

Question 5

How much internal memory does the Wireless GO II have for on-board recording?

Accepted Answer

The Wireless GO II transmitters are capable of recording over 24 hours of compressed audio or 7 hours of uncompressed audio each. Once storage on the device is full, the oldest saved recordings will be overwritten. Recordings can be accessed, optimised, exported, and deleted via RØDE Central. Find out more about on-board recording via the Wireless GO II User Guide.

Question 6

Is the Wireless GO II compatible with the original Wireless GO?

Accepted Answer

No, the Wireless GO II is not currently compatible with the original Wireless GO.

Question 7

What is RØDE Central?

Accepted Answer

RØDE Central is a companion app for the Wireless GO II that allows you to control all of the functions of the transmitters and receiver, update firmware, and access features such as on-board recording, the fine gain control and safety channel. To download and find out more about RØDE Central, head to the Wireless GO II User Guide.

Question 8

What is the difference between the Wireless GO II and the original Wireless GO?

Accepted Answer

The Wireless GO II and original Wireless GO share the same compact form factor, unique cold shoe clip, in-built microphone, and easy-to-use design. However, the Wireless GO II is a dual channel wireless microphone system, which consists of two transmitters and a single receiver. It also offers an extensive feature set that make it extremely versatile, including both an analog 3.5mm TRS output for plugging into cameras and a digital audio output via USB for plugging into smartphones, tablets and computers, on-board recording, 200m range with improved transmission stability, flexible gain controls, safety channel, complete control over all features and functions via RØDE Central, and much more.

Question 9

What is the difference between the Wireless GO II's 'Merged' and 'Split' recording modes?

Accepted Answer

The Wireless GO II gives you the option to either record in 'Merged' or 'Split' mode (toggled by pressing and holding the pair and gain buttons on the receiver for three seconds or via RØDE Central). This allows you to record each transmitter onto separate channels on the output ('Split' mode) or combine the two into a single output ('Merged' mode). When it's in 'Split' mode, there will be two output level meters, when it's in 'Merged' mode, there will be just one. Read more about this at the Wireless GO II User Guide.

Question 10

How does the Wireless GO II's safety channel work?

Accepted Answer

When activated, safety channel mode will record a second track of audio at -20dB as a backup in case your sound source gets loud unexpectedly and causes the main channel to distort. To enable safety channel mode, open the RØDE Central app, plug in the Wireless GO II receiver, navigate to the settings screen, and click the 'Safety Channel' toggle (note: this can only be activated in 'Merged' mode). Read more about the safety channel at the Wireless GO II User Guide.

Question 11

How do I connect the Wireless GO II to a smartphone, tablet or computer?

Accepted Answer

The Wireless GO II features a digital audio output via USB-C, which allows you to record directly into any smartphone, tablet, or computer without the need for adaptors or other audio interfaces. The Wireless GO II comes with three USB-C to USB-A cables for charging and also connecting to computers with a USB-A input. To connect to a computer, Android smartphone or tablet, or any other device with a USB-C input, you will need a USB-C to USB-C cable, such as the RØDE SC16. To connect to an iOS device, such as an iPhone or iPad, you will need the RØDE SC15 or SC19. The Wireless GO II is MFi-certified, meaning it will interact seamlessly with all iOS devices.

Question 12

How do I enable on-board recording on the Wireless GO II?

Accepted Answer

The Wireless GO II's on-board recording function is enabled and disabled via the RØDE Central app. To activate it, plug in the transmitter(s), navigate to the settings screen and toggle the 'Record' button to either 'Always' or 'Backup'. In 'Always' recording mode, the transmitter will start recording audio as soon as it is switched on and will continue recording until it is switched off, regardless of whether is it connected to the receiver. In 'Backup' recording mode, the transmitter will start recording audio when it connects to the receiver. When the receiver is switched off, the recording will stop.

When on-board recording is enabled, a red 'REC' icon will appear on that transmitter’s channel on the receiver. These recordings can be accessed, optimised, exported, and deleted via RØDE Central. Read more about on-board recording at the Wireless GO II User Guide.

Question 13

How do I connect the Wireless GO II to my iOS device? I have an MFi-certified Lightning to USB-C cable but it doesn’t work?

Accepted Answer

To connect the Wireless GO II to your iOS device, you need the RØDE SC15 or SC19.

This is different to the ‘charge and sync’ cable that may have been included with your Apple device and other standard USB-C to Lightning cables.

Question 14

What are the current OS requirements for using RØDE Central?

Accepted Answer

When using RØDE Central on a Mac device, the Operating System Requirements are 10.13 or later.

When using RØDE Central on a Windows device, the Operating System Requirements are Windows 10 Version 1803 or later.

Question 15

Will the smartLav+ (or any other TRRS connection) work with the Wireless GO II?

Accepted Answer

The smartLav+ has a TRRS input, meaning it will only work with the Wireless GO II via a TRRS to TRS adapter such as the SC3.

Wireless GO II

Sistema de micrófono inalámbrico

Aprovecha la Libertad de lo Inalámbrico

Increíble Versatilidad

Seguro y Sonoro

Audio Profesional de Tamaño Pocket

Descargue RØDE Central

Móvil

Escritorio

RØDE Connect

Guía del Usuario Wireless GO II

Wireless GO II Individual

Especificaciones

Wireless GO II

Preguntas frecuentes

Productos

Servicio

Compañía