耳机 / Accessories / NTH-Mic

New

NTH-Mic

Headset Microphone for NTH-100

立即购买

NTH-Mic 是一款用于 RØDE NTH-100 头戴式耳机的广播级话筒，可将其改造为专业耳机。这款耳机可重现自然且极为细腻的语音效果，造型流畅、不张扬，并设计了最佳的话筒位置来消除爆破音，使其成为了媒体、广播、播客、流媒体以及居家办公或办公室办公的理想选择

主要特点

  • 广播级头戴式话筒
  • 直接插入 RØDE NTH-100 耳机，将其改造为专业耳机。
  • 高质量电容式音头可再现清晰、自然且极度细腻的语音
  • 可通过坚固的锁定连接器轻松拆卸
  • 最佳的话筒位置以防止爆破音
  • 低调、不张扬的设计
  • 在 RØDE 位于澳大利亚悉尼的最先进的工厂中采用高档组进行设计和制造
主要特点
包装内容
资源
BROADCAST QUALITY

BROADCAST QUALITY

TRRS CONNECTION

TRRS CONNECTION

OPTIMAL MIC POSITION

OPTIMAL MIC POSITION

改造您的 NTH-100 头戴式耳机

您可通过 NTH-Mic 将 RØDE NTH-100 耳机改造为专业耳机，用于多种场景——媒体、广播、播客、流媒体、内容创作、电话会议及其它商业应用。其设计专门用于直接插入 NTH-100，通过坚固的锁定连接器，即可在只想使用头戴式耳机时轻松拆卸。

Girl wearing white in front of computer screen using NTH-100M

极为清晰的语音捕捉

NTH-Mic 设有高质量的电容式音头，可以捕捉到极为细腻的声音，且拥有平坦的频率响应，在任何环境下都能实现出色的清晰度。话筒也被定位在最佳位置，以消除爆破音，保持音频纯净。

Close-up of NTH-Mic mesh detail

线条流畅、造型时尚

NTH-Mic 采用了时尚的磨砂表面，造型设计流畅、低调、不张扬，使用时不会遮挡面部，确保您不受任何视觉干扰，让您在镜头前呈现出最佳状态。

Boy sitting on gaming chair wearing NTH-100M

NTH-100M 和 NTH-Mic 用户指南

查看此处，了解 NTH-Mic 头戴式耳机话筒的所有相关信息。这份用户指南全面地介绍了如何将 NTH-Mic 连接至 NTH-100 头戴式耳机及其使用方法。

Learn More
Diagram of NTH-Mic connecting to NTH-100

规格

Acoustic & Electrical

Mechanical

Acoustic Principle
Permanently polarized
Active Electronics
JFET impedance converter
Acoustic Principle
Omnidirectional
Frequency Range
20Hz - 20kHz
Signal-to-noise Ratio
67dB
Equivalent Noise Level (A-Weighted)
27dBA Typical
Maximum SPL
106dB SPL RMS (Plug-In Power, 1% THD) 123dB SPL RMS (Plug-In Power, 10% THD)
Maximum Output Level
307mV (@ 1kHz, 10% THD into 1KΩ load)
Sensitivity
38dB re 1 Volt/Pascal (12.59 mV @ 94 dB SPL) +/- 3 dB @ 1kHz
Dynamic Range
92dB @ max input
Connection Type
3.5mm bayonet jack (for NTH-100)

常见问题

Q.
Can it work with different headsets?
A.
No, the NTH-Mic is custom-designed for the NTH-100.
A.
The jack has a TRRS connector, allowing for two-way audio transmission.
A.
Yes, you can connect the NTH-100M to the RØDECaster Pro II using the included splitter cable and a 3.5mm to XLR adaptor that converts phantom power to plug in power, such as the VXLR Pro or VXLR+. Plug the end of the splitter cable with the microphone symbol into the VXLR Pro, then connect this to any of the RØDECaster Pro II’s XLR inputs and ensure phantom power is turned on for that channel. Then plug the other end of the cable into one of the RØDECaster Pro II’s headphone outputs using the supplied ¼-inch to 3.5mm adaptor to monitor your audio.
A.
The NTH-Mic works with any mobile device that has a 3.5mm TRRS headphone port, or when used with the adaptor that came with your phone (I.e. either a Lightning-to-3.5mm or USB-C-to-3.5mm adaptor) so long as it supports a TRRS connection.