How To Use a Lavalier Mic
Lavalier microphones – also known as lapel mics or clip-on mics – are small wired microphones that are widely used in filmmaking and broadcasting. They are ideal for recording dialogue as they are discreet and unobtrusive and can be positioned close to the mouth while remaining out of sight. This ensures you can get clean, clear audio in a variety of recording situations, whether that’s vlogging, reporting to camera, or recording an interview.
There are two main things to consider when using a lavalier mic: how to position it and how to connect it to your recording device. Let’s take a closer look at what you need to know about each.
RØDE Lavalier II
How to Position a Lavalier Mic
When positioning a lavalier mic, it’s important to think about its proximity to your sound source (usually you or your subject’s mouth) in order to get the best sound possible. Most lav mics feature an omnidirectional capsule, meaning they pick up sound from all directions and are therefore quite forgiving when recording. However, as a general rule, it’s recommended that you position the mic on the chest, about a hand-span distance (20-30cm) from the mouth. This will give you a natural, uncoloured sound.
Attaching Your Lav to Its Clip
All lavs come with a clip that allows you to mount the mic onto a piece of clothing. For first-time users, these clips can be a little confusing, but they are very easy to use. Simply slip the windshield off the mic, pinch the spiral clasp, insert your mic into the loop and release the clasp to secure the mic in place. Now you can slip the windshield back on.
Mounting Your Lav
Positioning a lavalier mic is easiest when there is an edge of clothing to secure it to, such as the lapel of a jacket, seam of a button-up shirt, or the edge of a tie. Just be sure to keep the mic clear from any other piece of clothing that may rub against it, as this will be audible in your recording.
If you are wearing clothes that don’t offer a strong seam for mounting, such as a singlet or t-shirt, things can get a little tricker. You can mount the mic on a neckline – just be aware that if the mic is right under the neck the sound can be coloured and sound strange. You can avoid this with a looser neckline, or by mounting the mic over to the side, rather than directly below the chin.
If you are wearing a singlet, the shoulder straps are another great place to mount a lavalier mic. This is often the best solution if you are wearing exercise clothing. Or if you want to get creative, mounting the mic underneath a headband also works well. Provided the mic is 20-30cm from your mouth, and does not have clothing rubbing against it, you will get a great result.
RØDE Wireless GO II paired with the Lavalier GO in action
Keeping It Concealed
To keep your video looking clean and professional, you may want to consider concealing the cable. You can simply tuck it out of sight under your jacket or run it inside your shirt. Pro sound engineers will use drapers' tape to secure the cable against the inside of clothing; you could improvise with gaffer tape or even regular sticky tape if you want to keep things out of sight. Using what’s known as the “broadcast loop” will give you a neat, professional profile. Click here for an in-depth look at how to mount a lavalier mic on yourself or on talent.
The RØDE MicDrop is a simple cable weight that makes mic’ing up talent with a lavalier microphone quick and easy. It helps to pull the microphone cable downwards through clothing, allowing you to easily plug it into a bodypack transmitter or recording device, saving time and minimising disruption while recording. MicDrop is compatible with all RØDE lavalier microphones - check it out here.
Connecting a Lavalier Microphone to a Recording Device
Once you have your lavalier mounted and positioned nicely, the next step is connecting it to your recording device. There are two things to consider here: what kind of device you are plugging it into and whether you need to connect wirelessly or not. This will determine what kind of equipment you need.
Computers and Mobile Devices
If you are connecting your mic to a smartphone, tablet or computer, the AI-Micro is the perfect all-in-one solution.
The AI-Micro is an ultra-compact dual-channel audio interface that allows you to connect two lavaliers to a mobile device or computer. It features auto-sensing inputs that accommodate both TRS and TRRS lavaliers (no need for adaptors) and also has a high-quality 3.5mm headphone output so you can monitor your audio in crystal-clear definition
The AI-Micro is a great option for vlogging, interviews, mobile podcasting, or recording any video content where you are seated in front of the camera. If the cable on the lavalier mic isn’t quite long enough to reach your device, or you need some extra leeway to move around, you can use a RØDE SC1 extension cable.
If you are recording into a DLSR, mirrorless or compact camera, or an audio device like a portable recorder, you will need a lavalier mic with a TRS jack, such as the RØDE Lavalier II.
If you need space to move around when recording with a lavalier mic, such as if you’re filming a tutorial or presentation, or you simply do not to be tethered to your recording device, using a wireless system is the way to go. There are a number of options in the RØDE range, but for a compact, affordable and easy-to-use solution, the Wireless GO II is perfect.
Wireless systems are comprised of two main components: a transmitter pack, which is attached to the subject and captures and transmits the audio, and a receiver pack, which plugs into the recording device and receives the audio from the transmitter wirelessly.
The Wireless GO II is a unique microphone in that it features a capsule built into the transmitter pack, meaning you don’t need to use a wired lavalier mic – just clip the transmitter onto your chest as you would a normal lavalier. Of course, if you prefer using a standard lavalier mic, there is an input for this too. This is a TRS input, so you need a lavalier with a TRS jack. The Lavalier GO is the perfect option.
Once you have your lavalier set up, simply plug the receiver into your camera using the supplied patch cable and you’re ready to go.
RØDE Wireless GO II
Using TRRS to TRS Adaptors
When it comes to using mics with a 3.5mm jack, such as lavalier microphones, you need to pay close attention to what kind of output your microphone has and what kind of input your recording device has – specifically, whether they are TRS or TRRS.
TRS/TRRS incompatibility is a very common reason for microphones not working with certain devices. These jacks look very similar, but with RØDE products we’ve made it easy to identify what type of connector your microphone has by colour-coding them: all TRRS connectors are grey, so they can be plugged directly into computers and mobile devices; all TRS connectors are black, so these can be plugged directly into regular audio and camera equipment.
If you already own a microphone, but it’s incompatible with your recording device, don’t worry – there are a range of RØDE adaptors that allow you to use a TRS microphone with a TRRS device and vice versa. As mentioned above, when looking to record with a smartphone or computer, the AI-Micro is a great solution that takes the guesswork out of TRS/TRRS compatibility and offers a super-high recording solution.
RØDE Lavalier GO with a SC4.
This may seem confusing but just remember – grey connectors are TRRS for plugging into computers or mobile devices; black connectors are TRS for plugging into audio devices and cameras.
If you have any questions about a specific device you are using or the best audio solution for you, get in touch with our support team and we’ll be happy to help.